|
| The standard of the industry, the 204 Series accurately resurfaces
rotors, drums and flywheels. The 204C features a dual slide operation
which allows machining of drums and discs with no changeover. The
204S offers the same combination lathe qualities without the dual
slide investment. The 204SX & 204CX both offer extended spindle
travel. This machine allows you to turn all the drums and rotors
in your shop on one machine. From large over the road trucks to
small compact cars. |
- Disc Side Slide
- Built-in Work Light
- Hardened and Ground Spindle
- Single Piece Heavy Body Casting
- Drum Side Slide
- 1 Horsepower Motor
- Spindle Feed and Cross Feed Slide : Infinitely variable from
0 to .020" per revolution and from 1 to 3-1/8" per
minute
- The 204C is permanently set up to machine drums and rotors
with no tool change.
|
- Heavy-Duty Dove-Tailed Manual and Power Tool Slide
- Internal Continuous Oil Bath
- Adjustable Automatic Disengage Mechanism
- Infinitely Variable Speed Control
- The 204S allows you to machine drums and rotors with a tool
change. It can be converted to a dual slide operation at any
time
- Unitized Heavy Gauge Welded Base
|
| Specifications |
| Spindle Speeds |
60,100 and 170 RPM |
| Spindle Travel |
8 3/4" |
| Motor |
1 HP, 115 Volt, 60HZ, 1PH (other voltages available) |
| Drum Size |
6" to 28" diameter - 8" wide |
| Rotor Size |
Maximum Diameter 24", 0 to 2-1/2" wide |
| Shipping Weight |
204S: 600 Ibs., 204SX,204C,204CX: 650 lbs. |
Back to Top
Rels
Model 2000 Combination Brake Lathe
The Most
Advanced Brake Lathe on the Market! |
Back
to Top
Next Offer |
- Turn Rotors Faster and get the Best Possible Finish with the
Infinitely Variable Speed Rotor Feed Gear Box.
- Separate Motors on the Drum Feed & Rotor Feed Maximize
the Main Motor's Efficiency
- Hardened & Ground Spindle Eliminates the need for boots
- ALL Metal Gears
- Internal Parts are Compatible with the Ammco 4000
- Hubless Adapter is Standard Equipment
|
- Our New Standard Adapter Package is Easy to Use and lets You
Machine ALL Composite Rotors WITHOUT Buying Expensive Optional
Adapters
- The Modern Design of the Drum Feed Gear Box Eliminates High
Maintenance Mechanical Gears
- Easily Accessible Control Panel Makes it Impossible to put
the Machine in Both Rotor Feed & Drum Feed at the Same Time
- Bench is Standard Equipment
|
 |
The serpentine pulleys and belt give you a faster,
quieter machine by increasing RPMs while reducing chatter and vibration.
|
| The Modern Design of the Drum Feed Gear Box Eliminates
High maintenance Mechanical Gears |
 |
 |
Internal Parts are Compatible with the Ammco 4000,
which means familiar design with revolutionary improvements. |
| |
Easily Accessible Control Panel Makes it Impossible
to put the Machine in Both Rotor Feed & Drum Feed at the Same
Time. |
 |
 |
Turn Rotors Faster and get the Best Possible Finish
with the Infinitely Variable Speed Rotor Feed Gear Box. |
| Specifications |
| Spindle Speed |
150 and 200 rpm |
| Crossfeed Speed |
Infinitely variable, 0 to .010" per revolution |
| Spindle Feed |
Infinitely variable, 0 to .020" per revolution |
| Spindle Travel |
6-7/8" |
| Rotor Width |
2-1/2" |
| Drum Diameter |
6 to 28" |
| Rotor Diameter |
17" |
| Drum/Rotor Weight |
150 Ib. w/ standard arbor, 250 Ib. w/ 1-7/8" arbor |
| Spindle Diameter |
2-7/8" |
| Motor |
1hp, 115 v, 60 hz, 1ph, (other voltage available) |
Back to Top
| The 304 series of brake lathes from RELS MANUFACTURING INC. are
the ultimate in performance and durability. They are designed for
heavy-duty professional use and are built in the quality tradition
that made RELS brake lathes the standard in the industry. Equipped
with the optional compensator and grinding attachment, the 304 allows
one man to turn and simultaneously grind a set of 58" diameter
dual wheels weighing up to 1500 Ibs. The adjustable spindle arrangement
permits turning drums up to 14" deep with a single set-up.
A simple tool adjustment allows working on deeper drums. The optional
disc turning attachment allows the turning of brake rotors from
the smallest cars to the largest trucks without sacrificing speed
or performance. Ease of use is built in with all controls conveniently
located on one side of the unit. The RELS 304... The full size brake
lathe designed for the quality minded professional. |
- Can accommodate 58" dual wheels and up to 1500 Ibs. with
optional compensator
- Adjustable long-life spindle bearings
- Single-piece, heavy body casting
- Machine tool gibbed dovetail ways
|
- Heavy-duty hardened sliding spindle adjusts up to 14"
deep
- Combination sliding and revolving tool slide
- Infinitely adjustable motor speed control
|
| Specifications |
| Spindle Feed Rate |
Variable-Low .0064"/.0125" per rev. Variable-1/4"
to 2" per min |
| Cross Slide Feed Rate |
Variable-0 to .021" per rev. Variable-0 to .84" per
min. |
| Spindle Speeds |
40-160 RPM 14" |
| Spindle Travel |
2-5/8" |
| Drum Slide Tool Bar Adjustment |
Width 0 to 2-1/2" |
| Disc Tool Claw Range |
500 Ibs. |
| Spindle Capacity |
1,500 Ibs. |
| Spindle Capacity w/ Load Compensator |
1725 RPM, 2 HP |
| Spindle Motor, Industrial Type |
3450 RPM, 3/4 HP |
| Grinder Motor, Industrial Type Base |
20" L x 48" W |
| Height less Compensator |
45" |
| Height w/ Compensator |
96" |
| Shipping Weight |
1,100 Ibs. |
| Shipping Dimensions |
48" x 60" x 60" |
| Drum Diameter |
Min. 6" - Max. 30" |
| Wheel (Tire) Diameter |
Max. 58" |
| Drum Depth (Before Tool Adj.) |
Max. 14" |
| Disc Diameter |
Min. 6" - Max. 20" |
| Disc Thickness |
Max. 2-1/2" |
| Cross Slide Travel |
Cutter 2 5/8", Grinder 5" |
| Standard Equipment |
Optional Equipment |
- Mandrel and Draw Bar Wrench
- 3/8" Allen Wrench
- Honing Stick
- Brake Drum Vibration Dampener
- 7/8" & 5/16" Open End Wrench
- Spanner Wrench
- 9/64" Allen Wrench
- Heavy Truck Set for 2" Arbor
- Tool Bar Clamp
- Dial and Screw
- Arbor Seating Nut
- Tool Bar
- 2" Arbor
- Tool Cutting Assembly
|
- Load Compensator
- Disc Brake Attachment
- Grinding Attachment
- Davit Crane
- Truck Set for 2" Arbor
- 1" Arbor Kit and Equipment
|
 |
Shown with optional compensator, grinding
attachment and disk brake attachment. |
Back to Top
Rels
5000 Variable Speed Gearbox
For Use
With Ammco Models 3000, 4000,
and 4100 Brake Lathes |
Back
to Top
Next Offer |
| This new product is designed to offer you everything you would
have to pay upwards of $4,000 to get...But allows you to do it at
a fraction of that cost.
If you have been considering purchasing a new lathe because your
old one is being used to capacity or just because it doesn't have
the variable speed function ... think again! Upgrade that old
Ammco lathe and bring it into the 21st century with our all new,
very impressive Variable Speed Gearbox!
The 5000 Gearbox has less than 20 parts for easier repair and
less opportunity for breakdown. The innovative design turns the
lead screw nut, not the shaft, reducing wear on the cross feed
casting and lead screw shaft. This reduces friction and vibration
for a smoother cut and greater productivity. Best of all-the the
5000 Gearbox easily bolts to your existing lathe without permanent
modification or costly, time consuming installation. |
- Cuts rotor in less than 2 minutes
- Simply replace your existing gearbox and pulleys with the
new ones for greater productivity, power, and profitability
- Our free videotape walks you through the easy, step-by-step
installation
|
- Offers variable speed control
- Produces a better surface finish
- The Rels 5000 comes complete with controller, gearbox, pulleys
and a self-contained motor to avoid robbing power from your
lathe
- Improves lathe performance
|
 |
Gearbox Installed on Ammco 4000 Lathe. No Special
Tools or Modifications Needed.
Simply replace your existing gearbox and pulleys with the new ones
for greater productivity, power, and profitability. The 5000 comes
complete with controller, gearbox, pulleys and a self-contained
motor to avoid robbing power from your lathe. Our free videotape
walks you through the easy, step-by-step installation. |
| Offering twice the pulling power of the old Ammco
pulley system, these pulleys are so smooth running that lathe vibration
is almost eliminated! The easy to install pulleys and Poly-V belt
system increases arbor speed from 150 RPMs to 200 RPMs to boost
productivity. Normally used in 5 hp applications, it will not slip
when adjusted properly. Poly-V belts and pulleys are sold separately
to allow upgrade of Ammco 3000, 4000,4100 or 7000 for a smoother,
faster performance. Pulleys may also be used effectively without
the 5000. |
 |
 |
The controller offers greater speed variety - from
Ammco`s fastest to as slow and fine a finish as you desire - with
all the wide range of speeds in between. Simply slow down the controller
to reach true one cut capability or increase the speed to raise
productivity. Vary the depth to accommodate speed changes. Handle
it all - usually in less than 2 minutes. |
| Specifications |
| Motor |
Voltage |
Weight |
Height |
Width |
Depth |
| 1HP |
110 |
18 lbs. |
10" |
5" |
9" |
Back to Top
Rels
Brake Lathe
Comparison Chart
| |
Rels
204SX |
Rels
2000 |
AMMCO
4000 |
Accu-Turn
8922 |
Accu-Turn
8944 |
Kwik-Way
104 |
Hunter
BL500 |
| Rotors |
| Max. Dia. |
24" |
17" |
13" |
24" |
24" |
24" |
7"-23" |
| Max. Width |
2-1/2" |
2" |
1-3/4" |
2-1/4" |
2-1/4" |
2.85" |
2" |
| Max. Weight |
200 |
200 |
100 |
150 |
150 |
150 |
200 |
| Drums |
| Diameter |
6"-28" |
6"-28" |
6"-28" |
6"-28" |
6"-28" |
6"-28" |
6"-28" |
| Max. Width |
9-7/8" |
6-7/8" |
6.875" |
6" |
6" |
9" |
8" |
| Max. Weight |
200 |
200 |
100 |
150 |
150 |
150 |
200 |
| Specifications |
| Feed Speeds |
0 - .020 infinite |
0-.010 infinite |
.002-.010 2 speed |
.003
1 speed |
.001 -.010
infinite |
0-.026 infinite
|
.002 -.014 infinite |
| Spindle Size |
2.875 |
2.875 |
2.875 |
2.900 |
2.900 |
2.750 |
|
| Spindle Speed |
3 speed 60-100-170 |
2 speed 150 - 200
|
2 speed 150-200
|
1 speed
|
3 speed |
variable 20-315
|
3 speed 85-110-175 |
| Motor |
1 hp 115v |
1 hp 115v |
1 hp 115v |
1 hp 115v |
1 hp 115v |
1 hp 115v |
1 hp 115v |
| Accessories |
| Hubless Adapter |
Standard |
Standard |
Optional |
Optional |
Optional |
Optional |
Optional |
| Composite Adapter |
|
Standard |
Optional
$1,247.85 |
Optional
$576.00 |
Optional
$576.00 |
Optional |
Optional
$1,190.00 |
| Bench |
Standard |
Standard |
Optional
$342.17 |
Optional
$307.00 |
Optional
$307.00 |
Optional |
Optional
$556.00 |
| Chip Tray |
Standard |
Standard |
Optional |
Optional |
Optional |
Optional |
Optional |
| Re-Finish Rotor |
| Average Time |
2 min. |
2 min. |
10 min. |
10 min. |
2 min. |
2 min. |
2 min. |
| Warranty |
1 year |
2 years |
1 year |
1 year |
1 year |
2yr, 1 yr motor |
1 year |
Back to Top
|
